 |
13. You now need to wash your hands so you have no glycol on
your hands.
14. On the New Red C-element you smear a very light coating of RTV Silicon, this
will seal the C-element in place. Don’t use too much as it will become very
messy.
15. Don’t touch the Red part of the C-element with your fingers.
16. Place the Red C-element into place and gently push.
17. Replace the Black Face Ring and install the 4x Hex Bolts.
18. Visually check all looks good.
19. Let the C-element sit for a week to cure.
20. Now you are ready to refill with NEW Glycol. Glycol turns yellow over time,
so it would probably be a good thing to replace the other 2 tubes glycol as
well. You have a week to do it as the Red C-element is curing.
21. Leave a small air bubble in the top of the LC chamber, there is no reason to
fill it right up.
I hope that this helps those see how to change the Red C-element.
Cheers
Steve
| Did you find this information useful? Please consider making a
donation to help defray the cost of managing and hosting future
articles, tips, and documents. |
|
|
|
Or
purchase
from
Amazon.com
and a small percentage automatically
goes to support this site at no extra cost to you! Visit their
Blu-ray and
4K UHD
stores for sales.
Want to show off your
home theater? See our
Blu-ray Release List & Must-Have Titles. |
|
|
|
|
|
