CurtPalme.com Home Theater sales, calibration, service, and discussion forum. Hundreds of free manuals & setup tips.
   


 
Sign up and receive the latest newsletters by email!     Join the Forum discussions!    
    Site Map  
Home Products
For Sale
Referral
List
Photo
Gallery
Links Contact
Us
CRT Primer
Troubleshooting Tips
Mounting Methods
Definitive CRT
Projector Setup Guide
Tube/Raster Setup
Tube Condition (Wear)
Projector
Specifications
Projector Rankings
Video Processors
Ampro 1500/2000
Ampro 2300/2600
Ampro 3600/4600
Barco (Older Analog)
Barco 70x/Cine7  
Barco 500/800/801
Barco 808/Cine8
Barco 120x/Cine9
Dwin 500/700
Electrohome ECP 
Electrohome Marquee 
Mitsubishi
NEC PG
NEC XG
Panasonic 108x
Runco
Seleco
Sony 10xx
Sony 125x/127x
Sony 1292
Sony D50
Sony G70
Sony G90
Zenith 841/851
Zenith 895/900
Zenith 1200

Sony G90 C-Element Change 

(Page 4)

Back to Advanced Procedures Index

Page: 1 2 3 4 5
 

 



12. Replace the glycol tank screw and turn the assembly upside down like this (using Sony original tube carton can help with this as seen below):

You can easily see that there is air inside and below the C-Element.  By placing the tube exactly vertical, we'll avoid glycol spilling out when we remove the C-Element from the LC housing.


13. Retrieve the Marquee C-Element and start to remove the remaining rubber from the C-Element by cutting the bellows behind the C-Element and remove it from the housing (use Exacto sharp blade or equivalent):



14. A view of the C-Element with the main part of the rubber removed:



15. With the blade, finish removing the remaining glued-on rubber:




... Previous Page

Next Page ...


 

© Copyright CurtPalme.com. All Rights Reserved.