Sony G70 (LC) Tube Swap

6. Unscrew the top tube rotation screw and chassis ground lead:

7.  Slide the bottom rotation tube axis up and to the right as follows:

8. Carefully slide-out the complete assembly with one hand on the LC housing and the other on the tube neck end. Ensure that you do not stress any wires/connectors during this operation:

9. Leave the tube on a smooth surface facing down as follows:

10. Unscrew all DY/Sub-DY/MG and 2P/4P coils assemblies screws around the tube neck and place them in the same order/orientation on the floor (don’t forget to carefully remove the plastic wedge located between Sub-DY and MG coils):