6. Transfer the glycol in the syringe into a CLEAN and DRY glass. Be very
careful to not spill any glycol as it is very corrosive to just about everything (including human skin!):
7. Repeat this glycol removal step three times removing approximately 50-60ml
each time such that the quantity removed is approximately150-200ml. At each
step, gently tilt the tube to let
air bubbles enter the tank in the C-element chamber (which then re-fills the
tank with glycol). At the end (and after replacing the glycol chamber
screw!) the C-element looks like this:
8. After checking that the glycol chamber screw is correctly back in place,
unscrew the four metal bracket screws 2 turn at a time alternating in diagonal/crossing
order:
9. Do this until you can remove the metal bracket from the tube. Be
careful to NOT move the glass tube itself from the LC housing:
|
